Pneumatic Supply Plate; Multipole Boards - Aventics AV03 Description Technique Et Mode D'emploi

60 AVENTICS | AV03/05 with IO-Link | R412018145–BAL–001–AC
Conversion of the Valve System
Fig. 3: Base plates, 2x and 3x
10
10
 Valve position 1
 Valve position 2
 Valve position 3
10.2.2

Pneumatic supply plate

Pneumatic supply plates (6) can be used to divide the valve system into sections with different
pressure zones (see "10.4 Conversion of the valve zone" on page 63).
Fig. 4: Pneumatic supply plate
10.2.3

Multipole boards

The IO-Link interface features six valve positions at minimum configuration. You can expand the
valve system with multipole extension boards up to a permissible maximum of 24 solenoid coils. Due
to the design, an expansion of valve positions to seven is not possible.
11
10 Base plate, 2x
11 Base plate, 3x
6
6
11
P