Télécharger Imprimer la page
Masquer les pouces Voir aussi pour AS Serie:

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 32

Liens rapides

Betriebsanleitung | Operating instructions | Mode d'emploi |
Istruzioni per l'uso | Instrucciones de servicio | Bruksanvisning
Durchflusssensor
Flow rate sensor
Débitmètre
Flussometro
Sensor de medición de caudal
Flödessensor
AF2
R412026496/2019-07, Replaces: -, DE/EN/FR/IT/ES/SV

Publicité

loading

Sommaire des Matières pour Aventics AS Serie

  • Page 1 Betriebsanleitung | Operating instructions | Mode d’emploi | Istruzioni per l’uso | Instrucciones de servicio | Bruksanvisning Durchflusssensor Flow rate sensor Débitmètre Flussometro Sensor de medición de caudal Flödessensor R412026496/2019-07, Replaces: -, DE/EN/FR/IT/ES/SV...
  • Page 2 Warnhinweise Die Durchflussmessung am Durchflusssensor funktioniert nur korrekt bei Verwendung von AVENTICS Verbindungskabeln der Serie CON-RD - M12x1 (siehe Online-Katalog). In dieser Anleitung stehen Warnhinweise vor einer Handlungsanweisung, bei der die Gefahr von Personen- oder Sachschäden besteht. Die beschriebenen Maßnahmen zur Gefahrenabwehr Führen Sie die Aderquerschnitte der anwenderseitig zuführenden Versorgungsleitung...
  • Page 3 HD 60364.4.41, EN 60079-14). Der Stromkreis muss potentialfrei sein (nicht geerdet). Halten Sie den Montageort leicht zugänglich und frei von Vibrationen. Benutzen Sie für das Anschließen des Durchflusssensors AVENTICS Halten Sie einen minimalen Freiraum von 150 mm für die Transmittereinheit des Verbindungskabel der Serie CON-RD - M12x1.
  • Page 4 AVENTICS | AF2 | R412026496–BAL–001–AA | Deutsch Anzeige- und Bedienelemente Simulate Durchfluss simulieren Display Simulieren Sie im Untermenü Flow den Durchfluss. Im Normalbetrieb zeigt das Display folgende Werte und Symbole an: Temperatur simulieren 1. Statuszeile Simulieren Sie im Untermenü Temperature die Temperatur.
  • Page 5 AVENTICS | AF2 | R412026496–BAL–001–AA | Deutsch Counter MQTT Zähler anzeigen lassen Webschnittstelle ein- und ausschalten Wählen Sie zwischen den Untermenüs Mass, Volume, Energy, lastReset, um die Zähler Wählen Sie das Untermenü State und stellen Sie Active oder Inactive ein.
  • Page 6 AVENTICS | AF2 | R412026496–BAL–001–AA | Deutsch 2. Lösen und entfernen Sie alle Anschlüsse. Qa Menu 3. Lösen Sie den Durchflusssensor mit Hilfe eines Maulschlüssels vom Druckanschluss Dieses Menü enthält die Einstellungen des Analogausgangs. (Gewindeanschluss) oder ziehen Sie den Durchflusssensor geradlinig vom Steckanschluss Stromausgang Messparametern zuordnen Ordnen Sie im Untermenü...
  • Page 7 AVENTICS | AF2 | R412026496–BAL–001–AA | Deutsch 12 Entsorgung Prozessanschluss G3/8", G1/2", G1" (entsprechend DIN ISO 228-1) Entsorgen Sie die Verpackung und verbrauchte Teile gemäß den Bestimmungen des Medienberührende Teile Edelstahl 1.4305, PA6, Viton®, Aluminium Verwenderlandes. Gehäusematerial PC+ABS, PA66+PA6I GF50, PC, TPE, Edelstahl 1.4301...
  • Page 8 Abbildungen: Ansicht variiert je nach Serie. 19 x 1,8 23 x 2 45,5 M12x1 = 37 x 2,3 AS2 : 0,5 Nm M3 x 53 AS3 : 2,5 Nm M5 x 68 AS5 : 3,0 Nm M6 x 90 Montage mit Befestigungsbügel 35,5 IO-Link 19 x 1,8...
  • Page 9 AVENTICS | AF2 | R412026496–BAL–001–AA | Deutsch 14 Menü-Übersicht IO-Link Screen 1.1 Screen 2.1 Events Status Signal (Kg/h) Display 1 Top 60 min (m/s) Display 1 Btm (m/s) Screen 1.2 Screen 2.2 Info (m³) Display 2 Top Signal Quality (m³/h) Display 2 Btm Screen 1.3...
  • Page 10 AVENTICS | AF2 | R412026496–BAL–001–AA | Deutsch Qa Menu Mode 4 ... 20 mA Volumetric Flow Range 4 ... 20 mA Temperature 4 ... 20 mA Pressure abort store High ## # (unit) abort store ## # (unit) abort store...
  • Page 11 AVENTICS | AF2 | R412026496–BAL–001–AA | Deutsch Rotation 0° 90° 180° 270° abort store ScreenSaver 1 min 2 min 5 min 10 min 30 min 60 min abort store AutoOffOff 1 min 2 min 5 min 10 min 30 min...
  • Page 12 AVENTICS | AF2 | R412026496–BAL–001–AA | Deutsch History 60 min Dynamic charts: MassFlowRate Pressure Temperature 24 hours Energy Mass VolumetricFlowRate 7 days Volume FlowVelocity abort store Statistics View max, mean, min values: MassFlowRate Pressure Temperature LastReset VolumetricFlowRate (read only) FlowVelocity...
  • Page 13 AVENTICS | AF2 | R412026496–BAL–001–AA | Deutsch Menü-Übersicht Ethernet Screen 1.1 Screen 2.1 Events Status Signal (Kg/h) Display 1 Top 60 min (m/s) Display 1 Btm (m/s) Screen 1.2 Screen 2.2 Info (m³) Display 2 Top Signal Quality (m³/h) Display 2 Btm Screen 1.3...
  • Page 14 AVENTICS | AF2 | R412026496–BAL–001–AA | Deutsch Update ##### ms abort store QoS0 QoS1 QoS2 abort store Send Unit Active Inactive abort store MassFlowRate Active Inactive abort store FlowVelocity Active Inactive abort store VolFlowRate Active Inactive abort store Volume Active...
  • Page 15 AVENTICS | AF2 | R412026496–BAL–001–AA | Deutsch Pressure abort store Pages Disp Top1 MassFlowRate Pressure Temperature Energy Disp1 Btm Mass VolumetricFlowRate Volume Disp2 Top FlowVelocity Disp2 Btm Disp3 Top Disp3 Btm Disp History abort store Rotation 0° 90° 180° 270°...
  • Page 16 AVENTICS | AF2 | R412026496–BAL–001–AA | Deutsch Measure Flow Medium Argon Helium Temperature Filter Nitrogen 100 ms 200 ms abort store 500 ms User Defined ISO2533 10 s ISO1217 DIN1945-1 abort store DIN1343 Pressure Offset ##.#°[P] ISO6358 abort store abort...
  • Page 17 Presentation of information Flow measurement in the Durchflusssensor only works properly when AVENTICS connecting cables (series CON-RD - M12x1) are used (see online catalog). Warnings Execute the wire cross-sections of the supply cable supplied by the user in accordance with In this document, there are safety instructions before the steps whenever there is a danger of the applicable standards.
  • Page 18 Make sure that the assembly location is easy to access and free from vibrations. Use AVENTICS connecting cables (series CON-RD - M12x1) to connect the Observe a minimum free space of 150 mm for the transmitter unit of the flow rate sensor.
  • Page 19 AVENTICS | AF2 | R412026496–BAL–001–AA | English Display and Operating Elements Simulate Simulating the flow Display Go to the Flow submenu to simulate the flow. During normal operation, the display shows the following values and symbols: Simulating the temperature 1. Status bar Go to the Temperature submenu to simulate the temperature.
  • Page 20 AVENTICS | AF2 | R412026496–BAL–001–AA | English Counter MQTT Viewing the counters Switching the web interface on and off Select from the submenus Mass, Volume, Energy, and lastReset, to view the counters. Go to the State submenu to switch between Active and Inactive.
  • Page 21 AVENTICS | AF2 | R412026496–BAL–001–AA | English 11 Error and Warning Messages Qa Menu This menu contains the settings for the analog output. The following error and warning messages may appear in the flow rate sensor display if the relevant error status results from a certain condition.
  • Page 22 AVENTICS | AF2 | R412026496–BAL–001–AA | English 13 Technical Data Process connection G3/8", G1/2", G1" (according to DIN ISO 228-1) Parts that are in contact with the Stainless steel 1.4305, PA6, Viton®, aluminum Technical Data media Measuring principle Calorimetric (flow)
  • Page 23 Figures: View varies according to the series. 19 x 1,8 23 x 2 45,5 M12x1 = 37 x 2,3 AS2 : 0,5 Nm M3 x 53 AS3 : 2,5 Nm M5 x 68 AS5 : 3,0 Nm M6 x 90 Assembly with mounting clip 35,5 IO-Link...
  • Page 24 AVENTICS | AF2 | R412026496–BAL–001–AA | English 14 Menu overview IO-Link Screen 1.1 Screen 2.1 Events Status Signal (Kg/h) Display 1 Top 60 min (m/s) Display 1 Btm (m/s) Screen 1.2 Screen 2.2 Info (m³) Display 2 Top Signal Quality (m³/h) Display 2 Btm...
  • Page 25 AVENTICS | AF2 | R412026496–BAL–001–AA | English Qa Menu Mode 4 ... 20 mA Volumetric Flow Range 4 ... 20 mA Temperature 4 ... 20 mA Pressure abort store High ## # (unit) abort store ## # (unit) abort store...
  • Page 26 AVENTICS | AF2 | R412026496–BAL–001–AA | English Rotation 0° 90° 180° 270° abort store ScreenSaver 1 min 2 min 5 min 10 min 30 min 60 min abort store AutoOffOff 1 min 2 min 5 min 10 min 30 min...
  • Page 27 AVENTICS | AF2 | R412026496–BAL–001–AA | English History 60 min Dynamic charts: MassFlowRate Pressure Temperature 24 hours Energy Mass VolumetricFlowRate 7 days Volume FlowVelocity abort store Statistics View max, mean, min values: MassFlowRate Pressure Temperature LastReset VolumetricFlowRate (read only) FlowVelocity...
  • Page 28 AVENTICS | AF2 | R412026496–BAL–001–AA | English Menu overview Ethernet Screen 1.1 Screen 2.1 Events Status Signal (Kg/h) Display 1 Top 60 min (m/s) Display 1 Btm (m/s) Screen 1.2 Screen 2.2 Info (m³) Display 2 Top Signal Quality (m³/h) Display 2 Btm Screen 1.3...
  • Page 29 AVENTICS | AF2 | R412026496–BAL–001–AA | English Update ##### ms abort store QoS0 QoS1 QoS2 abort store Send Unit Active Inactive abort store MassFlowRate Active Inactive abort store FlowVelocity Active Inactive abort store VolFlowRate Active Inactive abort store Volume Active...
  • Page 30 AVENTICS | AF2 | R412026496–BAL–001–AA | English Pressure abort store Pages Disp Top1 MassFlowRate Pressure Temperature Energy Disp1 Btm Mass VolumetricFlowRate Volume Disp2 Top FlowVelocity Disp2 Btm Disp3 Top Disp3 Btm Disp History abort store Rotation 0° 90° 180° 270°...
  • Page 31 AVENTICS | AF2 | R412026496–BAL–001–AA | English Measure Flow Medium Argon Helium Temperature Filter Nitrogen 100 ms 200 ms abort store 500 ms User Defined ISO2533 10 s ISO1217 DIN1945-1 abort store DIN1343 Pressure Offset ##.#°[P] ISO6358 abort store abort...
  • Page 32 La mesure de débit sur le Durchflusssensor fonctionne correctement uniquement au moyen éviter des dangers doivent être respectées. de câbles de connexion AVENTICS de la série CON-RD - M12x1 (voir catalogue en ligne). Structure des avertissements Exécuter les sections de conducteur du câble d’alimentation à fournir par l’utilisateur conformément aux normes en vigueur.
  • Page 33 41, HD 60364.4.41, EN 60079-14). Le circuit électrique doit être exempt de Conditions de pose potentiel (pas mis à la terre). Pour raccorder le Durchflusssensor, utiliser des câbles AVENTICS de série CON- Maintenir l’emplacement de montage facilement accessible et exempt de vibrations. RD - M12x1.
  • Page 34 AVENTICS | AF2 | R412026496–BAL–001–AA | Français Éléments d’affichage et de commande Simulate Simulation du débit Affichage Dans le sous-menu Flow (Débit), simuler le débit. En exploitation normale, l’écran affiche les valeurs et symboles suivants : Simulation de la température 1.
  • Page 35 AVENTICS | AF2 | R412026496–BAL–001–AA | Français Counter MQTT Affichage des compteurs Activation et désactivation de l’interface Web Pour afficher les compteurs, choisir entre les sous-menus Mass (Masse), Volume (Volume), Sélectionner le sous-menu State (État) et régler Active (Actif) ou Inactive (Inactif).
  • Page 36 AVENTICS | AF2 | R412026496–BAL–001–AA | Français 10 Démontage Qa Menu Ce menu contient les réglages de la sortie analogique. ATTENTION Affectation des paramètres de mesure à la sortie de courant L’installation est sous une pression élevée. Dans le sous-menu Mode, affecter des paramètres de mesure tels que le débit, la température et la pression à...
  • Page 37 AVENTICS | AF2 | R412026496–BAL–001–AA | Français Message Classification Description Tension d’alimentation U 17 … 30 V CC Q2 Config out of Range Info Points de commutation en dehors de Puissance absorbée < 12 W (@ 24 V CC sans charge de sortie) la plage de mesure paramétrés...
  • Page 38 Figures : la vue peut varier en fonction de la série. 19 x 1,8 23 x 2 45,5 M12x1 = 37 x 2,3 AS2 : 0,5 Nm M3 x 53 AS3 : 2,5 Nm M5 x 68 AS5 : 3,0 Nm M6 x 90 Montage avec étrier de fixation 35,5...
  • Page 39 AVENTICS | AF2 | R412026496–BAL–001–AA | Français 14 Vue d’ensemble du menu IO-Link Screen 1.1 Screen 2.1 Events Status Signal (Kg/h) Display 1 Top 60 min (m/s) Display 1 Btm (m/s) Screen 1.2 Screen 2.2 Info (m³) Display 2 Top Signal Quality (m³/h) Display 2 Btm...
  • Page 40 AVENTICS | AF2 | R412026496–BAL–001–AA | Français Qa Menu Mode 4 ... 20 mA Volumetric Flow Range 4 ... 20 mA Temperature 4 ... 20 mA Pressure abort store High ## # (unit) abort store ## # (unit) abort store...
  • Page 41 AVENTICS | AF2 | R412026496–BAL–001–AA | Français Rotation 0° 90° 180° 270° abort store ScreenSaver 1 min 2 min 5 min 10 min 30 min 60 min abort store AutoOffOff 1 min 2 min 5 min 10 min 30 min...
  • Page 42 AVENTICS | AF2 | R412026496–BAL–001–AA | Français History 60 min Dynamic charts: MassFlowRate Pressure Temperature 24 hours Energy Mass VolumetricFlowRate 7 days Volume FlowVelocity abort store Statistics View max, mean, min values: MassFlowRate Pressure Temperature LastReset VolumetricFlowRate (read only) FlowVelocity...
  • Page 43 AVENTICS | AF2 | R412026496–BAL–001–AA | Français Vue d’ensemble du menu Vue d’ensemble du menu Ethernet Ethernet Screen 1.1 Screen 2.1 Events Status Signal (Kg/h) Display 1 Top 60 min (m/s) Display 1 Btm (m/s) Screen 1.2 Screen 2.2 Info (m³) Display 2 Top...
  • Page 44 AVENTICS | AF2 | R412026496–BAL–001–AA | Français Update ##### ms abort store QoS0 QoS1 QoS2 abort store Send Unit Active Inactive abort store MassFlowRate Active Inactive abort store FlowVelocity Active Inactive abort store VolFlowRate Active Inactive abort store Volume Active...
  • Page 45 AVENTICS | AF2 | R412026496–BAL–001–AA | Français Pressure abort store Pages Disp Top1 MassFlowRate Pressure Temperature Energy Disp1 Btm Mass VolumetricFlowRate Volume Disp2 Top FlowVelocity Disp2 Btm Disp3 Top Disp3 Btm Disp History abort store Rotation 0° 90° 180° 270°...
  • Page 46 AVENTICS | AF2 | R412026496–BAL–001–AA | Français Measure Flow Medium Argon Helium Temperature Filter Nitrogen 100 ms 200 ms abort store 500 ms User Defined ISO2533 10 s ISO1217 DIN1945-1 abort store DIN1343 Pressure Offset ##.#°[P] ISO6358 abort store abort...
  • Page 47 Le misure descritte per la prevenzione di pericoli La misurazione della portata con l’Durchflusssensor funziona correttamente solo in caso di devono essere rispettate. impiego dei cavi di collegamento AVENTICS della serie CON-RD - M12x1 (vedere catalogo Struttura delle avvertenze di sicurezza online).
  • Page 48 (senza messa a terra). Mantenere uno spazio libero minimo di 150 mm per l’unità di trasmissione del flussometro. Per il collegamento dell’Durchflusssensor AVENTICS servirsi di cavi di Tenere presente la temperatura ambiente (ved. “13 Dati tecnici”) e al tempo stesso la collegamento della serie CON-RD - M12x1.
  • Page 49 AVENTICS | AF2 | R412026496–BAL–001–AA | Italiano Elementi di visualizzazione e comando Simulate Simulazione della portata Display Simulare la portata nel sottomenu Flow. In normali condizioni di esercizio il display indica i seguenti valori e simboli: Simulazione della temperatura L1. Riga di stato Simulare la temperatura nel sottomenu Temperature.
  • Page 50 AVENTICS | AF2 | R412026496–BAL–001–AA | Italiano Counter MQTT Visualizzazione dei contatori Attivazione e disattivazione dell’interfaccia web Selezionare tra i sottomenu Mass, Volume, Energy, lastReset per visualizzare i contatori. Selezionare il sottomenu State e impostare Active o Inactive. Ripristino dei contatori Broker Selezionare il sottomenu Reset per resettare i contatori.
  • Page 51 AVENTICS | AF2 | R412026496–BAL–001–AA | Italiano 11 Messaggi di errore e avvertimenti Qa Menu Questo menu contiene le impostazioni dell’uscita analogica. Sul display del flussometro possono essere visualizzati i seguenti messaggi di errore e di avvertimento se lo stato di errore interessato viene richiamato da una determinata condizione.
  • Page 52 AVENTICS | AF2 | R412026496–BAL–001–AA | Italiano 13 Dati tecnici Raccordo di processo G3/8", G1/2", G1" (secondo la norma ISO 228-1) Parti che vengono a contatto con il Acciaio inox 1.4305, PA6, Viton®, alluminio Dati tecnici mezzo Principio di misurazione...
  • Page 53 Figure: l’immagine varia in base alla serie. 19 x 1,8 23 x 2 45,5 M12x1 = 37 x 2,3 AS2 : 0,5 Nm M3 x 53 AS3 : 2,5 Nm M5 x 68 AS5 : 3,0 Nm M6 x 90 Montaggio con staffa di fissaggio 35,5 IO-Link...
  • Page 54 AVENTICS | AF2 | R412026496–BAL–001–AA | Italiano 14 Panoramica dei menu Link IO Screen 1.1 Screen 2.1 Events Status Signal (Kg/h) Display 1 Top 60 min (m/s) Display 1 Btm (m/s) Screen 1.2 Screen 2.2 Info (m³) Display 2 Top Signal Quality (m³/h) Display 2 Btm...
  • Page 55 AVENTICS | AF2 | R412026496–BAL–001–AA | Italiano Qa Menu Mode 4 ... 20 mA Volumetric Flow Range 4 ... 20 mA Temperature 4 ... 20 mA Pressure abort store High ## # (unit) abort store ## # (unit) abort store...
  • Page 56 AVENTICS | AF2 | R412026496–BAL–001–AA | Italiano Rotation 0° 90° 180° 270° abort store ScreenSaver 1 min 2 min 5 min 10 min 30 min 60 min abort store AutoOffOff 1 min 2 min 5 min 10 min 30 min...
  • Page 57 AVENTICS | AF2 | R412026496–BAL–001–AA | Italiano History 60 min Dynamic charts: MassFlowRate Pressure Temperature 24 hours Energy Mass VolumetricFlowRate 7 days Volume FlowVelocity abort store Statistics View max, mean, min values: MassFlowRate Pressure Temperature LastReset VolumetricFlowRate (read only) FlowVelocity...
  • Page 58 AVENTICS | AF2 | R412026496–BAL–001–AA | Italiano Panoramica dei menu Ethernet Screen 1.1 Screen 2.1 Events Status Signal (Kg/h) Display 1 Top 60 min (m/s) Display 1 Btm (m/s) Screen 1.2 Screen 2.2 Info (m³) Display 2 Top Signal Quality (m³/h) Display 2 Btm...
  • Page 59 AVENTICS | AF2 | R412026496–BAL–001–AA | Italiano Update ##### ms abort store QoS0 QoS1 QoS2 abort store Send Unit Active Inactive abort store MassFlowRate Active Inactive abort store FlowVelocity Active Inactive abort store VolFlowRate Active Inactive abort store Volume Active...
  • Page 60 AVENTICS | AF2 | R412026496–BAL–001–AA | Italiano Pressure abort store Pages Disp Top1 MassFlowRate Pressure Temperature Energy Disp1 Btm Mass VolumetricFlowRate Volume Disp2 Top FlowVelocity Disp2 Btm Disp3 Top Disp3 Btm Disp History abort store Rotation 0° 90° 180° 270°...
  • Page 61 AVENTICS | AF2 | R412026496–BAL–001–AA | Italiano Measure Flow Medium Argon Helium Temperature Filter Nitrogen 100 ms 200 ms abort store 500 ms User Defined ISO2533 10 s ISO1217 DIN1945-1 abort store DIN1343 Pressure Offset ##.#°[P] ISO6358 abort store abort...
  • Page 62 La medición de caudal en el Durchflusssensor solo funciona correctamente si se utilizan descritas de protección ante peligros. cables de unión AVENTICS de la serie CON-RD - M12x1 (véase el catálogo online). Estructura de las indicaciones de advertencia Realice los cortes transversales de los conectores de los cables de suministro aferentes del usuario según las normas vigentes.
  • Page 63 Mantenga siempre el lugar de montaje fácilmente accesible y libre de vibraciones. Para la conexión del Durchflusssensor, utilice cables de unión AVENTICS de la Respete un espacio libre mínimo de 150 mm para la unidad del transmisor del sensor de serie CON-RD - M12x1.
  • Page 64 AVENTICS | AF2 | R412026496–BAL–001–AA | Español Elementos de mando e indicación Simulate Simulación de caudal pantalla Simule el caudal en el submenú Flow. En modo normal, la pantalla muestra los valores y símbolos siguientes: Simulación de temperatura 1. Línea de estado En el submenú...
  • Page 65 AVENTICS | AF2 | R412026496–BAL–001–AA | Español Counter MQTT Visualización de los contadores Conexión y desconexión de la interfaz web Seleccione entre los submenús Mass, Volume, Energy, lastReset para visualizar los Seleccione el submenú State y configure Active o Inactive.
  • Page 66 AVENTICS | AF2 | R412026496–BAL–001–AA | Español 11 Mensajes de error y de advertencia Qa Menu Este menú contiene los ajustes de la salida analógica. Se muestran los siguientes errores y mensajes de advertencia en la pantalla del sensor de caudal cuando el estado de error relevante ha sido causado por una condición determinada.
  • Page 67 AVENTICS | AF2 | R412026496–BAL–001–AA | Español 12 Eliminación de residuos Conexión de proceso G3/8", G1/2", G1" (según DIN ISO 228-1) Elimine el embalaje y las piezas gastadas de acuerdo con las especificaciones del país en el que Piezas en contacto con el medio Acero inoxidable 1.4305, PA6, Viton®, aluminio...
  • Page 68 Figuras: la vista varía en función de la serie. 19 x 1,8 23 x 2 45,5 M12x1 = 37 x 2,3 AS2 : 0,5 Nm M3 x 53 AS3 : 2,5 Nm M5 x 68 AS5 : 3,0 Nm M6 x 90 Montaje con estribo de fijación 35,5 IO-Link...
  • Page 69 AVENTICS | AF2 | R412026496–BAL–001–AA | Español 14 Vista general del menú IO-Link Screen 1.1 Screen 2.1 Events Status Signal (Kg/h) Display 1 Top 60 min (m/s) Display 1 Btm (m/s) Screen 1.2 Screen 2.2 Info (m³) Display 2 Top Signal Quality (m³/h) Display 2 Btm...
  • Page 70 AVENTICS | AF2 | R412026496–BAL–001–AA | Español Qa Menu Mode 4 ... 20 mA Volumetric Flow Range 4 ... 20 mA Temperature 4 ... 20 mA Pressure abort store High ## # (unit) abort store ## # (unit) abort store...
  • Page 71 AVENTICS | AF2 | R412026496–BAL–001–AA | Español Rotation 0° 90° 180° 270° abort store ScreenSaver 1 min 2 min 5 min 10 min 30 min 60 min abort store AutoOffOff 1 min 2 min 5 min 10 min 30 min...
  • Page 72 AVENTICS | AF2 | R412026496–BAL–001–AA | Español History 60 min Dynamic charts: MassFlowRate Pressure Temperature 24 hours Energy Mass VolumetricFlowRate 7 days Volume FlowVelocity abort store Statistics View max, mean, min values: MassFlowRate Pressure Temperature LastReset VolumetricFlowRate (read only) FlowVelocity...
  • Page 73 AVENTICS | AF2 | R412026496–BAL–001–AA | Español Vista general del menú Ethernet Screen 1.1 Screen 2.1 Events Status Signal (Kg/h) Display 1 Top 60 min (m/s) Display 1 Btm (m/s) Screen 1.2 Screen 2.2 Info (m³) Display 2 Top Signal Quality (m³/h) Display 2 Btm...
  • Page 74 AVENTICS | AF2 | R412026496–BAL–001–AA | Español Update ##### ms abort store QoS0 QoS1 QoS2 abort store Send Unit Active Inactive abort store MassFlowRate Active Inactive abort store FlowVelocity Active Inactive abort store VolFlowRate Active Inactive abort store Volume Active...
  • Page 75 AVENTICS | AF2 | R412026496–BAL–001–AA | Español Pressure abort store Pages Disp Top1 MassFlowRate Pressure Temperature Energy Disp1 Btm Mass VolumetricFlowRate Volume Disp2 Top FlowVelocity Disp2 Btm Disp3 Top Disp3 Btm Disp History abort store Rotation 0° 90° 180° 270°...
  • Page 76 AVENTICS | AF2 | R412026496–BAL–001–AA | Español Measure Flow Medium Argon Helium Temperature Filter Nitrogen 100 ms 200 ms abort store 500 ms User Defined ISO2533 10 s ISO1217 DIN1945-1 abort store DIN1343 Pressure Offset ##.#°[P] ISO6358 abort store abort...
  • Page 77 Återgivning av information Tryckflödesmätningen i Durchflusssensor fungerar bara korrekt om AVENTICS anslutningskablar i serie CON-RD - M12x1 används (se online-katalogen). Varningsinformation Välj kabel med lämplig area i enlighet med giltiga standarder.
  • Page 78 (PELV enligt DIN VDE 0100-410, IEC 60364-4-41, HD 60364.4.41, EN 60079-14). Strömkretsen måste vara potentialfri (ej jordad). Monteringsförutsättningar Använd endast AVENTICS anslutningskabel i serien CON-RD - M12x1 för att ansluta Flödessensorn. Håll monteringsplatsen lättillgänglig och fri från vibrationer. Montera anslutningskontakten CON-RD - M12x1 noggrant för att säkerställa skyddsklass Håll ett minimumsavstånd på...
  • Page 79 AVENTICS | AF2 | R412026496–BAL–001–AA | Svenska Indikering och manövrering Simulate Simulera flöde Display Simulera genomflödet i undermenyn Flow. Vid normal drift visar displayen följande värden och symboler: Simulera temperatur 1. Statusrad Simulera temperaturen i undermenyn Temperature. 2. Mätvärde (flöde, tryck ...) Simulera tryck 3.
  • Page 80 AVENTICS | AF2 | R412026496–BAL–001–AA | Svenska Counter MQTT Visa räkneverket visas Slå på och stänga av webbgränssnittet Välj mellan undermenyerna Mass, Volume, Energy, lastReset för att visa räknarna. Välj undermenyn State och ställ in Active eller Inactive. Återställ räknare Broker Välj undermenyn Reset för att återställa räknarna.
  • Page 81 AVENTICS | AF2 | R412026496–BAL–001–AA | Svenska 11 Fel- och varningsmeddelanden Qa Menu Den här menyn innehåller inställningarna för den analoga utgången. Följande fel och varningar kan visas i flödessensordisplayen när relevant felstatus orsakas av ett visst tillstånd. Tilldela strömutgång till mätparametrar Det finns tre klassificeringar: info, varning och fel.
  • Page 82 AVENTICS | AF2 | R412026496–BAL–001–AA | Svenska 13 Tekniska data Processanslutning G3/8”, G1/2”, G1” (motsvarande DIN ISO 228-1) Mediaberörande delar Rostfritt stål 1.4305, PA6, Viton®, aluminium Tekniska data Material i höljet PC+ABS, PA66+PA6I GF50, PC, TPE, rostfritt stål 1.4301 Mätprincip Kalorimetrisk (flöde)
  • Page 83 Bild: Vy varierar beroende på serie. 19 x 1,8 23 x 2 45,5 M12x1 = 37 x 2,3 AS2 : 0,5 Nm M3 x 53 AS3 : 2,5 Nm M5 x 68 AS5 : 3,0 Nm M6 x 90 Montering med montagebygel 35,5 IO-Link 19 x 1,8...
  • Page 84 AVENTICS | AF2 | R412026496–BAL–001–AA | Svenska 14 Meny-översikt IO-länk Screen 1.1 Screen 2.1 Events Status Signal (Kg/h) Display 1 Top 60 min (m/s) Display 1 Btm (m/s) Screen 1.2 Screen 2.2 Info (m³) Display 2 Top Signal Quality (m³/h) Display 2 Btm Screen 1.3...
  • Page 85 AVENTICS | AF2 | R412026496–BAL–001–AA | Svenska Qa Menu Mode 4 ... 20 mA Volumetric Flow Range 4 ... 20 mA Temperature 4 ... 20 mA Pressure abort store High ## # (unit) abort store ## # (unit) abort store...
  • Page 86 AVENTICS | AF2 | R412026496–BAL–001–AA | Svenska Rotation 0° 90° 180° 270° abort store ScreenSaver 1 min 2 min 5 min 10 min 30 min 60 min abort store AutoOffOff 1 min 2 min 5 min 10 min 30 min...
  • Page 87 AVENTICS | AF2 | R412026496–BAL–001–AA | Svenska History 60 min Dynamic charts: MassFlowRate Pressure Temperature 24 hours Energy Mass VolumetricFlowRate 7 days Volume FlowVelocity abort store Statistics View max, mean, min values: MassFlowRate Pressure Temperature LastReset VolumetricFlowRate (read only) FlowVelocity...
  • Page 88 AVENTICS | AF2 | R412026496–BAL–001–AA | Svenska Meny-översikt Ethernet Screen 1.1 Screen 2.1 Events Status Signal (Kg/h) Display 1 Top 60 min (m/s) Display 1 Btm (m/s) Screen 1.2 Screen 2.2 Info (m³) Display 2 Top Signal Quality (m³/h) Display 2 Btm Screen 1.3...
  • Page 89 AVENTICS | AF2 | R412026496–BAL–001–AA | Svenska Update ##### ms abort store QoS0 QoS1 QoS2 abort store Send Unit Active Inactive abort store MassFlowRate Active Inactive abort store FlowVelocity Active Inactive abort store VolFlowRate Active Inactive abort store Volume Active...
  • Page 90 AVENTICS | AF2 | R412026496–BAL–001–AA | Svenska Pressure abort store Pages Disp Top1 MassFlowRate Pressure Temperature Energy Disp1 Btm Mass VolumetricFlowRate Volume Disp2 Top FlowVelocity Disp2 Btm Disp3 Top Disp3 Btm Disp History abort store Rotation 0° 90° 180° 270°...
  • Page 91 AVENTICS | AF2 | R412026496–BAL–001–AA | Svenska Measure Flow Medium Argon Helium Temperature Filter Nitrogen 100 ms 200 ms abort store 500 ms User Defined ISO2533 10 s ISO1217 DIN1945-1 abort store DIN1343 Pressure Offset ##.#°[P] ISO6358 abort store abort...
  • Page 92 German language. R412026496–BAL–001–AA/2019-07 Subject to modifications. © All rights reserved by AVENTICS GmbH, even and especially in cases of proprietary rights applications. It may not be reproduced or given to third parties without its consent.

Ce manuel est également adapté pour:

As2-af2-g038As3-af2-g012As5-af2-g100