Güde ECO WHEELER 1600 E Traduction Du Mode D'emploi D'origine page 10

Introduction
To enjoy your new ECO WHEELER 1600 E MOWER as
long as possible, please read carefully the Operating
Instructions and the attached safety instructions before
putting the appliance into operation. We also recommend
keeping the Operating Instructions for future reference.
We reserve making technical changes to improve the
appliance as part of the continuous product
development.
This document represents the original Operating
Instructions.
Supply includes
Take the appliance out of the transport container and
check whether there are the following parts:
• Mower including switching element and
feeder cable
•
Buffer
• Rear wheels and wheel covers (2 pcs)
• Front wheels and wheel covers (2 pcs)
•
Arch handle
•
Posts (2 pcs)
• Grass catcher (disassembled)
•
Cable pull relief equipment
•
Holding clamps for cable pull relief
equipment
•
Cable clamps (2 pcs)
•
Knife wrench
•
Original Operating Instructions
• Warranty certificate
If any parts are missing or are damaged, please contact
your dealer.
The appliance weight in assembled condition is 21 kg. If
necessary, lift the appliance off the transport container in
two people.
Appliance description (pic. 1)
1. Safety button
2. Starting lever
3. Cable pull relief equipment
4. Sliding handle
5. Buffer
6. Grass catcher
7. Wheels
8. Cutting height setting lever
9. Carrying handle
10. Cable clamps
11. Feeder cable
ECO WHEELER 1600 E mower technical specifications
Voltage/frequency:
Engine power:
Protection class:
Engine speed:
Cutting width:
Grass catcher capacity:
Cutting height setting:
Noise:
Assembly dimensions in mm:
Weight:
230V~50Hz
1,600 W
IPX4
-1
3,800 per min
420 mm
55 litres
5 levels
32 mm - 68 mm
L 96dB
WA
1,270 x 470 x
1,060
21 kg
10
General safety instructions
Please read carefully these Operating Instructions.
Familiarise with the control elements and appropriate use
of the appliance. Keep the Operating Instructions for future
reference.
Keep your place of work clean!
Mess in the place of work may result in injuries.
Consider the environment
Do not expose the appliance to rain.
Do not use the appliance in a wet or moist environment.
Provide adequate lighting.
Do not use the appliance near flammable liquids or gases.
Keep other persons in a safe distance!
Do not let other persons, especially children, touch the
appliance and cable. Keep them in a sufficient distance
from the place of your work.
Store the appliance properly!
An appliance that is not used should be kept in a dry,
locked place inapproachable to children.
Do not overload your appliance!
Work within the specified output range.
Use the right appliance!
Do not use the appliance for purposes for which it has not
been designed.
Look after your appliance!
Follow the servicing regulations and appropriate
instructions.
Check regularly the appliance cable and have it replaced
by an authorised professional if damaged.
Check regularly the extension cable and replace it if
damaged. Keep the handles clean with no sign of oil and
grease.
Be careful!
Pay attention to what you are doing. Use common sense
when working. Do not use the appliance when you are
tired.
CAUTION!
Use any other accessory equipment may lead to a risk of
injury.
Have your appliance repaired by an electrician only!
This appliance corresponds to appropriate safety
regulations. Repairs may only be executed by an
electrician, using original spare parts; otherwise, the user
will face a risk of injury.
Never cut when there are persons, especially children,
around.
Cut under adequate visibility only.
Appliance-specific safety instructions
Rotating knife
Perform any work/adjustment on the appliance only when
the engine is switched off, appliance unplugged and the
cutting knife idle.
Before cutting
Cut only with solid boots and long trousers; never cut
when barefooted or in sandals.