Activation After Selecting The Programme; Quick Start; Stop / Pause - Caso Germany EMCG 32 Mode D'emploi Original


Close doors
Close the door until the door latch audibly locks in place. If a current
cooking programme was interrupted as a result of opening the door, the
current cooking programme will be continued after pressing the button
.

13.5 Activation after selecting the programme

After selecting the program, press
programme.

13.6 Quick start

1) Quick start of the microwave: You can start the mircowave diectly with
full power for any period of time.
Turn
microwave on full power.
2) Press
Press
pressing, the maximum is 95 minutes.

13.7 Stop / Pause

In order to interrupt an ongoing cooking programme, you can proceed as
follows:
Press the
stopped.
Open the door of the device. The cooking programme that is in use will be
stopped.
► To continue the interrupted cooking program, press the button
after closing the door.
To terminate the interrupted program, press the button
► Before beginning a different cooking process you must delete the
display and reset the system by pressing the button
caso EMCG 32
to set the time and then press
in standby mode to heat food at full power for 30 seconds.
again to increase the time by 30 seconds which each
button once. The cooking programme that is in use will be
Please note
Please note
to start the preset cooking
directly to start the
a second time.
.
67