13.6 Activation after selecting the programme
After selecting the program, press the button Start/Quickstart, to start the
preset cooking programme.
13.7 Quick start
Utilise this function to programme the oven for comfortable cooking at 100%
microwave performance.
Press the Start/Quickstart button in quick sequence to set the cooking time.
The oven starts automatically after 2 seconds.
Once the end of the cooking time is reached, three signal tones will be
emitted and END will appear in the display.
13.8 De-activation:
In order to interrupt an ongoing cooking programme, you can proceed as
follows:
Pres the Stop button once. The cooking programme that is in use will be
stopped.
Open the door of the device. The cooking programme that is in use will be
stopped.
► To continue the interrupted cooking program, press the button
Start/Quickstart after closing the door.
To terminate the interrupted program, press the button Stop a second time.
Before beginning a different cooking process you must delete the display
and reset the system by pressing the button Stop.
13.9 Setting the clock
To set the clock on the device, proceed as follows:
Press the button Time/Weight.
Press the button once again to switch the oven from the 24 hour system to
the 12 hour system.
Turn the control dial Time/Menu until the correct hour is displayed.
caso MG 20 Menu
Please note
Please note
Activating setup mode
Setting the hours
60