Identification; Device Designation; Nameplate; Scope Of Delivery - Endress+Hauser iTEMP HART TMT142 Manuel De Mise En Service

Identification

52
2 Identification
2.1

Device designation

2.1.1

Nameplate

Compare the nameplate on the device with the following diagram:
Fig. 1: Nameplate of the field transmitter (example)
1 Order code and serial number of the device
2 Degree of protection and approvals
3 Power supply and output signal
4 Ambient temperature
2.2

Scope of delivery

The scope of delivery of the field transmitter comprises:
• Temperature field transmitter
• Dummy plug
• Operating Instructions
• ATEX Operating Instructions for deploying a device permitted for use in hazardous areas
2.3

Certificates and approvals

CE mark, declaration of conformity
The temperature field transmitter is designed to meet state-of-the-art safety requirements, has been
tested and left the factory in a condition in which it is safe to operate. The device meets the relevant
standards and directives as per EN 61 010 "Safety requirements for electrical equipment for
measurement, control and laboratory use".
The device described in these Operating Instructions thus meets the legal requirements of the EU
directives. The manufacturer confirms that the device has been tested successfully by affixing the
CE mark.
UL recognized component to UL 3111-1 â
CSA General Purpose
TMT142
Endress+Hauser