Endress+Hauser iTEMP HART TMT142 Manuel De Mise En Service page 69

TMT142
®
Availability in ReadWin 2000, HART
Measuring point
Input and display of the information relating to the measuring point identification
Measuring point Input: 8 characters
TAG
Description Input: 16 characters
Message Input: 32 characters
Device information
Display of the information relating to the device identification
Device release Display of device release
Serial number 11 digit display of the E+H device serial number
(equal to that on the legend plate).
Software version Display of the software version
Hardware version Display of the hardware version
Certificates Display of device approvals
Device
Display of the information relating to the HART
Manufacturer Manufacturer's identification character: Endress+Hauser (=17)
Device type Device type identification: TMT 142
Date Individual use of this parameters
Hardware revision Revisions of the devices' electronic components
®
Availability in ReadWin 2000, HART
Security locking Set-up release code.
Input:
• Lock = 0
• Release = 241
Reset to default Reset to factory default values.
Input: 142
0
Output simulation Activate simulation mode.
Input:
• OFF
• ON
Simulation value Input of the simulation value (current).
Input: 3.58 to 23 mA
Endress+Hauser
Function group IDENTIFICATION
®
handheld terminal DXR 375 (symbol
®
device identification
Function group SERVICE FUNCTIONS
®
handheld terminal DXR 375 (symbol
7
)
7
)
Commissioning
7
®
ReadWin 2000 /FieldCare
+ +
+ +
- +
- +
+ +
+ +
+ +
- +
- +
- +
- +
- +
7
®
ReadWin 2000 /FieldCare
+ +
+ +
+ +
+ +
69