Control Panel - CASO DESIGN Stick SV 400 Manuel D'utilisation Original

Warning Risk of crushing!
► When screwing the device to the cooking vessel, make sure that your hands
are out of the way of the screw to prevent crushing.

5.2 Control Panel

Display: Current temperature and remaining cooking time are displayed.
For activation of device and switching between temperature and time. If the
heating process has not yet started, you can switch between °C and °F by pressing the
button for 3 seconds.
Warning
► Make sure water is filled over min line, but
under max fill line, otherwise, the device
could be damaged.
► Use a cooking vessel with capacity 6 – 20 L
and RECOMMENDED minimum height of
6.3''.
► Please ensure that the cooking vessel can
bear temperatures up to 194°F.
setting of temperature in 0,5 °C steps
(25 – 90°C) 1 °F steps (77 – 194 °F)
00:01 – 2:00 setting of time in 1 minute steps
2:00 – 99:00 setting of time in 5 minute steps/time
activation/deactivation of device and starting of
heating process. Press and hold for 3 seconds to switch
to standby mode, the display will switch off.
12