Balancing The Trimmer; Adjusting The Bike Handle; Inserting And Removing Connecting Cable Plug; Inserting The Connecting Cable Plug - Stihl FSA 130 Notice D'emploi

English
7.4

Balancing the Trimmer

► Let go of the trimmer and check to see how it is balanced
- the cutting attachment should just rest on the ground.
► If the trimmer cannot be balanced: Change the attachment
point of the spring hook on the perforated strip and check
balance again.
7.5

Adjusting the Bike Handle

The bike handle can be set to different positions to suit the
height and reach of the user.
► Switch off the trimmer and pull the connecting cable plug
out of the socket.
► Loosen the wing screw (1).
► Swing the bike handle (2) to the required position.
► Tighten down the wing screw (1) firmly.
52
2
1

8 Inserting and Removing Connecting Cable Plug

8 Inserting and Removing Connecting
Cable Plug
8.1

Inserting the Connecting Cable Plug

► Hold connecting cable plug (1) so that the arrow on its side
lines up with the arrow on the socket (2).
► Insert the connecting cable plug (1) in the socket (2).
The plug (1) engages in position.
8.2

Removing the Connecting Cable Plug

► Grip the connecting cable plug (1) with your hand.
► Pull the plug (1) out of the socket (2).
1
2
1
2
0458-726-9921-A