Malossi 27 3021.K0 Mode D'emploi page 5

REED VALVES
These reed valves are designed with a flow
angle and with a recalculated flow capacity.
The petals are made of a material composed
of karbonit and carbon fibres. They are
manufactured with advanced production
processes and with carefully selected prime
materials. These reed valves are designed for
racing engines and they have been tested
and proven on racetracks.
Flow-guide (if included in the kit)
The flow-guide must be used only with
Malossi MHR intake manifolds. Once you
insert the flow-guide into the reed valve
system, we suggest you to connect it exactly
to the manifold diameter.
Please NOTE: it must NOT be used with
original manifolds, whose diameter is larger
or very different than the size of the flow-
guide.
In order to achieve the best performance,
please check if the air intake duct is
5