Stop Function; Recall Function - Atag HIDD8471E Instructions D'utilisation Et De Montage

Operation

4.15 Stop function

The cooking process can be briefl y interrupted with the
STOP function, e.g. if the doorbell rings. The STOP
function must be released in order to continue cooking at
the same power level. If a timer has been set it will pause
and will then continue.
This function is only available for 10 minutes for reasons
of safety. The hob will then be switched off .
1. Pots and pans are on the cooking zones and the
required power levels have been set.
2. Press the Stop key
settings, the interval sign
3. The interruption is ended by fi rstly pressing the STOP
key (the pause sign
any other key (except the ON/OFF key).
The second key must be pressed within 10 seconds
as the hob will otherwise be switched off .

4.16 Recall function

(recovery function)
The most recent setting can be recovered if the hob is
switched off unintentionally.
The recall function only works if at least one cooking
zone is switched on.
1. The hob is inadvertently turned off by the ON/OFF key
of the hob
Within 6 seconds after turning it off , press the ON/
OFF key of the hob
The STOP key blinks.
2. Immediately afterwards, press the STOP key
long as the pause sign
The original cooking levels are restored. The cooking
process continues.
What can be restored:
• Cooking levels of all cooking zones
• Minutes and seconds of programmed timer functions
• Automatic boost function
• Power boost
Not to be restored:
• Operation time limit (it is counted from 0)
. Instead of the selected power
will light up.
blinks) and then pressing
.
again.
is fl ashing.
GB
as
39