Cleanmaxx XL-312-80 Mode D'emploi page 21

❐ Keep the device, the cable and the mains plug away from water or other liquids in
order to avoid electric shocks. Make sure that no liquid gets into the device during
cleaning. Only the fi lters, the nozzles, the nozzle insert and the dust bin may be
cleaned with water. However, they must be completely dry before they are put back
into the device.
❐ The fi lters are not machine-washable, dishwasher-safe or suitable for tumble drying!
Only ever dry the fi lter in the air, and never use a hair dryer to do so.
❐ Do not use any sharp or abrasive cleaning agents or cleaning pads to clean the
device. These could damage the surfaces.
• Clean the HEPA fi lter regularly or if you notice a decrease in the suction power.
• Clean the housing if necessary using a damp, soft cloth. Dry it with a soft cloth.
• Remove hair and fl uff from the nozzles at regular intervals.
• Store the vacuum cleaner and the nozzles in a cool, dry indoor room out of the reach
of children and animals.
The HEPA fi lter may lose some of its colour over time. This is normal and does
not have any adverse effect on function.
3. Take the HEPA fi lter out of the dust bin.
4. Empty the dust bin over an open garbage can.
5. If necessary, you can rinse the dust bin and the nozzle insert with clear, lukewarm
water. CAUTION: Do not under any circumstances clean the dust bin and the nozzle
insert in a dishwasher! Then shake off any excess water and let them protective
frame dry completely in the air before you insert them both again.
6. Release the Velcro® of the microfi lter and remove it. If necessary, rinse the micro
fi lter out thoroughly with clean, lukewarm water.
7. Tap the HEPA fi lter. If necessary, thoroughly rinse the HEPA fi lter insert with clear,
lukewarm water.
1. In order to facilitate cleaning, press the release button for
the dust bin and loosen the nozzle adapter.
2. Turn the dust bin slightly to the left to remove it from the
main unit.
21