Mounting The Guard - EGO Power+ STX3800 Guide D'utilisation

MOUNTING THE GUARD

WARNING:
when mounting or replacing the guard.
Be careful of the blade on the guard and
protect your hands from being injured by
the blade.
1. Loosen the two bolts in the guard
with the supplied Allen key; remove
and reserve the bolts and spring
washers from the guard (Fig. 2).
2. Lift the trimmer head and face it
downward; align the two mounting
holes in the guard with the two
assembly holes in the base of the
shaft. Make sure that the internal
surface of the guard faces towards
the trimmer head (Fig. 3).
3. Use the supplied Allen key to lock
the guard in place.
Always wear gloves
56-VOLT LITHIUM-ION REAR-MOTOR 15" STRING TRIMMER — STX3800
2
3
15