Loop Handle - EGO Power+ STX3800 Guide D'utilisation

MOUNTING AND ADJUSTING THE

LOOP HANDLE

1. Loosen and remove the locking pole
and wing nut from the loop handle
(Fig. 4).
2. Push the loop handle onto the
carbon-fiber shaft between the
warning label and the threshold ring
(Fig. 5).
3. Insert the clamping block into the
handle slot (Fig. 6).
16
56-VOLT LITHIUM-ION REAR-MOTOR 15" STRING TRIMMER — STX3800
4
Locking Pole
Loop Handle
Clamping Block
5
6
Wing Nut