To Start The Hedge Trimmer; Using The Hedge Trimmer - EGO POWER+ HT2410 Guide D'utilisation

STARTING/STOPPING THE HEDGE TRIMMER
Before starting the hedge trimmer:
 Make sure that you have a secure and balance footing.
 Stand upright and hold the hedge trimmer in a relaxed position.
 Remove the blade guard.
 Make sure the cutting blade is not touching the ground or any other objects.
 Hold the unit with both hands: one hand on the rear handle and one hand on the
front handle.

TO START THE HEDGE TRIMMER

1. Install the battery pack.
2. Depress and hold the switch lever in the front handle with one hand.
3. Press and hold the lock-off button with the thumb of your other hand, then squeeze
the rear switch lever with your fingers to start the hedge trimmer. Release the lock-
off button and continue to squeeze the trigger for continued operation.
TO STOP THE HEDGE TRIMMER
Move the hedge trimmer away from the cutting area and release the rear switch lever
to stop the hedge trimmer.
WARNING:
work breaks and after finishing work.

USING THE HEDGE TRIMMER

WARNING:
BLADE! IT CAN BECOME ELECTRICALLY LIVE AND VERY DANGEROUS. Continue to hold
the hedge trimmer by the insulated rear handle or lay it down and away from you in
a safe manner. Disconnect the electrical service to the damaged line or cord before
attempting to free the blade from the line or cord. Failure to heed this warning will
result in serious personal injury or possible death.
18
56V LITHIUM-ION CORDLESS HEDGE TRIMMER—HT2410
Always remove the battery pack from the hedge trimmer during
If the blade jams on any electrical cord or line, DO NOT TOUCH THE