Table des Matières
Publicité
1. INSTALLATION INSIDE ENGINE COMPARTMENT
CAUTION
1. Before starting installation, remove the (–) terminal of the battery.
2. Before making any hoses and tubes connections, apply a few drops of compressor oil to the seat of O-ring and
coupling nuts.
3. When tightening and loosening the fittings, use two wrenches for support.
4. Ensure fender covers are in position.
f
e
d
(1) REMOVAL OF PARTS
(a)
Negative battery cable.
(b)
Cover above grille.
(c)
Front grille.
(d)
Radiator upper supports.
(e)
RH-under cover.
(f)
Loosen power steering fluid reservoir.
- 4 -
c
b
a
Publicité
Table des Matières
