Table des Matières
Publicité
2. AFTER INSTALLATION
CAUTION
Refer to the separate manual "GENERAL INFORMATION / AFTER INSTALLATION" for details on what to do after
installation. (Document code: AOUMU-01A / Document part number: 988963-3490)
2-1 CHARGING REFRIGERANT (HFC-134a)
For additional information on charging refrigerant using the charging cylinder, refer to "GENERAL INFORMATION / AFTER
INSTALLATION" (pages 28-32, 44).
STANDARD AMOUNT OF REFRIGERANT
CAUTION
Ensure to fill the refrigerant to the specified amount.
2-2 RE-ADJUSTMENT OF COMPRESSOR BELT
To correct belt deflection caused by initial elongation, the air conditioning must be operated for at least 5 minutes before the
final adjustment of the belt.
Vehicle with 3S-FE
CAUTION
1. Excessive tension of belt may have an adverse effect on bearings, while excessive slackness can cause belt to slip,
and makes abnormal noise or shortening the belt life.
2. The belt tension must be measured between the specified pulleys as indicated in this manual.
3. The belt tension must be adjusted to the center of the specified belt tension range.
Belt deflection
[at 98N(10kgf, 22lbf)force]
9 - 11 mm
- 22 -
+ 50
450
grams
- 0
Belt tension
[N (kgf)]
50 ± 5 kgf
Publicité
Table des Matières
