Specified Tightening Torques; Pressure Switch - Toyota ST220L Manuel D'installation

Table des Matières

Publicité

l
(l)
Connect the suction hose to the compressor using
a bolt (gold M6 x 30).
Tightening torque:
9.8 ± 2.0 N·m (100 ± 20 kgf.cm / 7.2 ± 1.3 ft.lbf).

(5) SPECIFIED TIGHTENING TORQUES

Tighten union type coupling at the specified torque:
Tube 8 mm: 13.7 ± 1.0 Nm (140 ± 10 kgf.cm / 9.8
± 1.0 ft.lbf).
Tighten the bolts of the tubes and hoses to the:
Compressor : 9.8 ± 2.0 N·m (100 ± 20 kgf.cm / 7.2
± 1.3 ft.lbf).
Condenser : 5.4 ± 1.0 Nm (55 ± 10 kgf.cm / 4.0 ±
0.7 ft.lbf)

(6) PRESSURE SWITCH

(a)
Connect the vehicle harness (4-P) to the pressure
switch.
a
- 18 -

Publicité

Table des Matières
loading

Table des Matières