shark Micro Conseils D'utilisation page 8

VZ140 «long trip» visor of your SHARK
Micro is injected into a polycarbonate
material specifically developed for its
excellent optical quality and high perfor-
mance shock resistance.
With a thickness of 2.2mm, it offers a good
strength. It was developed from a complete
aerodynamic simulation and is specifically
recommended for long journeys at high
speed: the long trip makes it possible to
have a good field of vision at slow speed
such as faster. VZ140 screen is optical
class 2.
It has three technical areas that allow a
greater demisting surface and a better
visibility:
- One come with air diffusers for a larger
demisting area
- Two shaped air outlets to force the ex-
traction of hot and humid air, by «Venturi
effect».
- Baffles channeling air flow away from the
plates, thus reducing the noise associated
with the aeroacoustics.
With its curved profile, this screen provides
protection against wash air even at high
speed.
The outer surface of the screen has a treat-
ment with high resistance to scratches.
1/ Opening of the visor
To open the visor, just unlock by pulling it
away slightly to the left (taken grip at the
bottom left of the screen). The pin which
maintained is released. Just then up the
screen on the top of the cap.
8
VISOR • MAINTENANCE
2/ Closure of the visor
To close, the screen can be manipulated
by gripping the outlet positioned on the
top center of the screen. Scroll down until
you hear it click: it is therefore locked by
the pin at the bottom left.
3/ Maintenance
For protection and improve its life, the
outer surface of your visor SHARK Micro
is antiscratch treated. When cleaning the
screen, use lukewarm water (below 40
degrees) and a soft cloth (100% cotton
and lint) to wipe the screen. Neutral soap
as "savon de Marseille" can help you
clean up..
WARNING! Never use any kind washing
windows (with alcohol or other solvent
type), these products can damage the
screen treatment.