shark Micro Conseils D'utilisation page 6

ADVISE FOR USE • CHIN STRAP MICROMETRIC bUCklE
aDViSE FOr USE
1/ Putting on the helmet
Once the chin strap is released, you have to
take hold of the two sections by the buckles and
hold them slightly apart to facilitate the passage
of your head. While carrying out this movement,
you are advised to keep the two sections of the
chin strap apart with your thumbs so that they
are properly positioned. Position the protective
parts of the chin strap buckle correctly and fas-
ten it in accordance with the recommendations
that are appropriate to the versions and country
(see page 6-7).
Check that the tension and therefore the posi-
tioning of the helmet are correct for all posi-
tions.
2/ removing the helmet
Release the chin strap; hold the two sections
slightly apart as for putting the helmet on and
remove the helmet.
6
CHIN STRAP MICROMETRIC bUCklE
Holding system
Depending on the various versions and the
country concerned, your SHARK Micro is equip-
ped with a chin strap with a "Precise Lock"
rapid buckle with a snap lock.
The "Precise Lock" snap lock system
gives you precise and accurate adjust-
ment because of the considerable length
of its notched section.
A
B