Legal Informations - shark Micro Conseils D'utilisation

SHARK Micro were specifically designed for motorcycle use. It is not to be subjected to any
technical modification. In order to offer an adequate level of protection, this helmet has to be
properly adjusted and securely fitted. Any helmet which has been subjected to a severe impact
must be replaced
Caution: Do not apply any paint, stickers, petrol or any other solvent to this helmet. Only the
visors, which have been approved N° E11-050416 and marketed under SHARK's reference
VZ140 can be used with SHARK Micro.This visor is made of injected polycarbonate.
Only the approved goggles VZ 7400 NF EN 1938:2010 must be used with SHARK. To keep the
good optical quality of the visor and the coatings do not use any solvent, petrol, abrasive paste
or similar products for cleaning. We advise to use a soft rag with cool water and mild soap. Visors
printed "DAYTIME USE ONLY" must not be used at night or in poor visibility conditions.
« This user manual insi that the contained images cannot be considered as contract em-
ployees.
SHARK Helmets reserves the right to improve the quality of the production.
The pictures contained in this document are the exclusive property of SHARK Helmets. »
lEgal inFOrMaTiOn
HARK - ZAC de la Valentine
S
110, route de la Valentine
13396 MARSEILLE
Cedex 11 FRANCE
Tél. : +33 (0)4 91 18 23 23
Fax : +33 (0)4 91 35 29 23
e-mail : contact@shark-helmets.com
site : www.shark-helmets.com