Storch ProDist compact Mode D'emploi page 63

Replacing the batteries
A matching assembly tool (a small screwdriver) is supplied with the
device. This is required for replacing the batteries
1. Unscrew the battery compartment slide cover on the
underside of the device.
2. Open the battery compartment
3. Insert the batteries, taking the polarity (+/-) into
consideration.
4. Replace the cover and screw down
Tip: Always keep the assembly tool in the small front pocket of the
storage holster.
ProDist compact -
LCD display overview
1 Laser on
2 Reference point
measurement top
3 Reference point
measurement bottom
4 Measuring function displays
• Area measurement
• Volume measurement
• Single Pythagoras
• Double Pythagoras
5 Single distance measurement
6 Battery display status
7 Stored values/archive
8 Device error message
9 Permanent measurement
and min / max measurement
10 Intermediate value 1
11 Intermediate value 1
12 Sum of the measured values
63