Performing Measurements; Other Functions - Storch ProDist compact Mode D'emploi

Performing measurements

Single distance measurement
Press the button to enable the laser. The laser symbol appears in
the dis- play, and the red laser dot appears on the surface the
laser measuring device is pointed at. Press the button again to start
the measuring action. The measured values are shown directly in the
display.
Permanent measurement (tracking)
and min/max measurement
For permanent measurement, the device is pointed at the object to be
measured; the measured values are then updated every 0.5 seconds.
The corresponding minimum and maximum values are shown dynami-
cally in the first and second lines.
For a permanent measurement in min/max mode, to determine the
shortest and longest distance, hold down the
the permanent measurement, either press the
The permanent measurement function is automatically terminated
after triggering 100 measurements.

Other functions

Addition (+) / Subtraction (-)
Single distance measurement
+
The next measurement is added to the previous one.
-
The next measurement is subtracted from
the previous one.
The last step is undone.
Return to single distance measurement.
button. To interrupt
65
or button.