Permobil F3 Corpus Manuel D'utilisation page 145

F3 Corpus
3.6.1.5 Mode avion
The ConnectMe device contains a radio transmitter. In certain areas
radio transmission is not allowed and ConnectMe has to be set to
airplane mode.
Activating airplane mode
1. Turn the power wheelchair ON.
2. Go into seat mode by using the mode button on the joystick or
Omni display. If the control panel does not have a mode button
use the left paddle switch for mode selection. A switch plugged
into the 1/8" monojack port of the joystick or Omni display can
also be used for mode selection.
3. If the control panel is an Omni programmed for switched driver
controls continue from step 6.
Apprendre à connaitre votre fauteuil roulant
Illustration 116. Various ways to access modes.
145