Climadiff CLIMA5K1 Notice D'utilisation page 49

NOTE: Make sure the hose is secure so there is no leakage. Point the pipe to the drain, making sure
there are no kinks that can prevent water flow. Place the end of the hose in the discharge hose and
make sure the end of the hose is down to allow the flow of water to flow smoothly. When the
continuous drain hose is not in use, make sure that the drain plug and knob are properly installed to
prevent leakage.Lorsque « P1 » s'affiche sur l'écran cela signifie que le réservoir d'eau inférieur est
plein, le climatiseur s'arrête alors de fonctionner. Cependant, le moteur du ventilateur continuera à
fonctionner (ceci est normal).
 When "P1" is displayed, please empty the water tank as soon as possible. Thanks to the wheels,
you can move the air conditioner where the water can be directly and easily drained (example:
toilets, sewers, etc.). If not, place a recovery tank under the water outlet.
 To do this, you must unscrew the nut on the back of the unit and remove the cap,
the water will drain naturally. To facilitate drainage, you can tilt your air
conditioner very slightly to the rear.Une fois le flux d'eau estompé, vous pouvez
à nouveau fixer le bouchon puis l'écrou.
 The symbol "P1" must disappear, if the symbol is still present, contact the help
desk.
CAUTION :
When you want to move your air conditioner and the water tank is full, make sure to move it
horizontally and perfectly stable to avoid any risk of water spillage or leakage (inside the unit
but also outside).
6. MAINTENANCE
Notice: in order to avoid electric shock, please turn off the A/C and unplug before
maintenance or repair.
Do not use any tools other than those recommended by the manufacturing.
CLEANING

Unplug before cleaning.
Wipe with soft semi-dry cloth. Don't use chemical reagent, such as benzene, alcohol and

gasoline etc; otherwise surface of the A/C and even the whole A/C will be damaged.

Prevent water from spattering in the A/C.
49