Climadiff CLIMA5K1 Notice D'utilisation page 48

11. ECONOMY/SLEEP Button
See Using SLEEP / ECO mode.
To cancel this function, press the MODE, FAN SPEED or ON / OFF button.
12. TIMER OFF Button
Press this button to start the automatic setting of the stop time. Each press will increase the time setting from 30
minutes to 10 hours, then increase from 1 hour to 24 hours.
To cancel, press the button until 0.0 is displayed.
You can combine the TIMER ON button with the TIMER OFF button, for example you can program the shutdown
of the device in 2 hours and program the start of this one in 10 hours. Between the period of 2h to 10h, the device
will be off.
13. LOCK Button
Press this button to lock all active settings after which the remote will only accept the LOCK operation. Use the
LOCK mode when you want to prevent the configuration from being changed accidentally. Press the LOCK
button again when you want to cancel the lock mode. A lock symbol will appear on the remote control display as
soon as the lock function is activated.
14. Turbo Button (Optional)
Press this button to activate the turbo mode, in air conditioner or heating mode, the speed will be at maximum
and the parameters will be restored after 20 min of turbo mode.
15. LED DISPLAY Button
Press this button to turn off the display on the air conditioner. Press again to turn on the display on the
air conditioner.
Drainage opération
 When the air conditioner is in dehumidifier mode (dry) remove the drain plug on the back of the
unit, install the drain connector (universal 5 / 8˝ female connector) with a 3/4 ˝ pipe (purchased
locally).
48