Network Connection - Comelit PPTZ120IRC Mode D'emploi


Connect related cables according to actual need (Power line, network line, audio line etc.)

Connect the power supply
Note:

Please read the user manual carefully before the installation.

Make sure to turn off all the power when install the camera

Please confirm the power transformer, avoid the device damage with unmatched power source

Network connection


LAN connection
Use one network line to connect IP camera with concentrator or switchboard of the LAN.

WAN connection
Use one network line to connect Network High Speed Domewith Router or XDSL Modem/Cable Modem, as shown below.

Connect the power supply
After connect the power source, the network camera will start operation automatically.
Figure 2-3
Figure 2-4
3
Loosen the screws of back
cover (4pcs) and take off the
cover
Insert micro-SD card