Display Settings - Comelit PPTZ120IRC Mode D'emploi


Protocol: PelcoD supported only

Address: 0-255 adjustable, default is 1

Baud Rate: Baud rate 9600 supported only

Operation method: Connect analog high speed dome at the Network High Speed Dome AB port, set the protocol and baud rate, and
control the high speed dome through IPC preview interface
After all parameters setting completed, click "Save" and then it comes into effect immediately.

Display settings

Network High Speed Dome "Display settings" interface as figure 3-15.

Name: Modify the appointed channel name

Main Stream OSD: Modify the appointed channel font of main stream OSD

Sub Stream OSD: Modify the appointed channel font of sub stream OSD

Time Format: Select different time display mode for the appointed channel

Date Format: Select different date display mode for the appointed channel

Bright: Adjust the brightness for the appointed channel

Contrast: Adjust the contrast for the appointed channel

Saturation: Adjust the saturation for the appointed channel

Hue: Adjust the hue for the appointed channel

Title Location: Set the channel title location for the appointed channel

OSD(Date Adjustment): Set the channel date location for the appointed channel

Multi OSD(position adjustment):Set the position of multi OSD

Cyclotron Arrow: Restore the default parameters (only for Bright, Contrast, Saturation and Hue)
After all parameters setting completed, click "Save" and then it comes into effect immediately.
Figure 3-15
14