Alarm Input - Comelit PPTZ120IRC Mode D'emploi

Alarm Input

Network High Speed Dome "Alarm Input" setting interface as figure 3-27.

Alarm Input: Select the alarm input number

Alarm In Name: Input alarm input name

Trigger: Select the alarm status: Normal Open/ Normal Close

Alarm Schedule: Alarm schedule can be set from Monday to Sunday

Email: Click Email, then it will send Email to appointed mailbox when alarm triggered

Snap: Click Snap, snapshot the current image picture when alarm triggered

Record: Click, it will do video record automatically when alarm triggered

Alarm Output: There is a warner connect the alarm output port, alarm triggered the embedded relay switch to make alarm output.

Snap count: Set the snapshot count in every second

Snap Interval: Set the snapshot interval time

Enable PTZ: Click Enable PTZ, it will linkage PTZ operation when alarm input

Preset: set the linkage preset point
After all parameters setting completed, click "Save" and then it comes into effect immediately.
Figure 3-27
24