Camera Set - Comelit PPTZ120IRC Mode D'emploi

Camera set

Network High Speed Dome "Camera set" setting interface as figure 3-17.

Exposure Control: Exposure mode include Full-automatic/ Shutter Priority/ Anti-Flicker, default is Full-automatic. When select Full-
automatic or Anti-Flicker, the shutter value cannot be set and when select Shutter Priority, the shutter value can be set.

AGC: Low/ Mid/ High selectable, default is High. The bigger of the gain value, the higher of the low illumination sensitivity, and the
more obvious of noisy point

Shutter: 1/1~1/10000，the smaller of the shutter value, the darker of the brightness

Color-mode: Normal/ Bright/ Nature selectable, default is Normal

WB mode: Auto WB/ Inside/ Outside selectable, select different white balance mode according to different scenes, default is Auto
WB

Mirror: Normal/ Horizontal Mirror/ Vertical Mirror/ 180 rotation selectable, default is Normal

Backlight mode: Close/ WDR/ Backlight correction, default is Close

Intensity: Low/ Mid/ High selectable. It is invalid when Backlight mode set close

Dark compensation: Close/ Low/ Mid/ High selectable, default is Mid

DNR mode: Close/ Low/ Mid/ High selectable, default is Mid

Zoom rate: Show/ Hide selectable, set the zoom rate and view the corresponding effect on the screen interface

Coordinate: Show/ Hide selectable, set the coordinate and view the corresponding effect on the screen interface

Status: Show/ Hide selectable, set the status and view the corresponding effect on the screen interface

Zoom speed: Low/ Mid/ High selectable, default is High

Anti-Shake: Close/ Open selectable, default is Close

Defogging: Close/ Open selectable, default is Close

Day&Night Mode: Auto/ Color/ Black White three kinds of mode selectable, default is Auto, According to the actual scene to select
the Day&Night mode
After all parameters setting completed, click "Save" and then it comes into effect immediately.
Figure 3-17
16