Faults And Troubleshooting - Gewiss JOINON Mode D'emploi

Faults and troubleshooting

11. Faults and troubleshooting
The station codifies any errors encountered by the electronic card. The following table explains the codes and how to solve the errors.
The operations described in this manual may only be performed by duly qualified personnel.
When this manual refers to qualified personnel, this means personnel complying with all the standards, directive and
laws concerning safety, as applicable to the installation and operation of this device.
Only the company making the intervention is able to decide whether the person in question is capable of carrying out
a certain task, so the selection of qualified personnel is always the responsibility of the company, to ensure safety and
respect the relevant workplace safety regulations.
Such companies must provide appropriate training for its personnel in relation to the electrical devices, and make sure
that personnel are fully familiar with the contents of this manual.
Code Error description
The front door is open for
maintenance or because it has
Error 1
been tampered with. This error
involves the whole station.
The miniature circuit breaker of
the relative socket-outlet/side is
OFF.
Error 2
NB: error not managed on the
WallBox version
7.55.4.502.0 - Installation and Operation Manual
Solution
Close the front door to restore
correct anti-tamper device
reading.
Restore the correct operation of
the miniature circuit breaker. If
the error persists, replace the
device.
Gewiss
Position
67
IT
EN
FR
ES
DE
RO
HU
NL