Gewiss JOINON Mode D'emploi page 57

Device installation and connection
2. Assemble the brackets (supplied) on the back plate of the WallBox;
3. Assemble the WallBox on the bracket that you have already fixed to the wall. After positioning the product, drill the wall using
the lower bracket as your centre point, then tighten the locking screw.
4. Check that the device is correctly fixed in place;
5. Remove the protective film from the front panel.
7.55.4.502.0 - Installation and Operation Manual
2,5 Nm
Gewiss
IT
EN
FR
ES
DE
RO
HU
NL
57