Gewiss JOINON Mode D'emploi page 58

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 77
Gewiss
If the product is to be installed on a pole (using the accessory GW46551), the procedure is as follows:
1.
Assemble the support brackets on the back plate of the WallBox, as shown below:
2.
Position the WallBox on the pole and fix it in place by tightening the locking nuts of the two plates as shown in the figure;
58
Device installation and connection
7.55.4.502.0 - Installation and Operation Manual

Publicité

Table des Matières
loading

Table des Matières