Lighting And Stoking - RAIS Rondo Manuel D'utilisation

US English User Manual for RAIS Rondo, RAIS Mino II and RAIS Mino II Soapstone

Lighting and Stoking

1
3
5
6
16
2
4
7
Step 1 & 2:
To light the fire, use fire starters, newspa-
pers or something similar, as well as 2 kg
of wood split into thin logs for kindling.
The air control must be opened com-
pletely.
D
O NOT USE GRATE OR ELEVATE FIRE
WOOD FIRE DIRECTLY ON HEARTH
Step 3 & 4:
Light the fire and close the door, leaving
a 10-15 mm gap (under supervision) until
the flames burn brightly. After approxi-
mately 5 to 10 minutes, close the door
completely.
Adjust the air control later if necessary.
Step 5:
After approximately 10-20 minutes, until
there is a good quantity of embers, add
two or three more logs. (Leave the door
slightly open until they catch fire and
then close the door.)
Step 6 & 7:
Approximately five minutes later, when
the flames burn clear and bright, close
the air control gradually, but not com-
pletely. Never close the air intake com-
pletely, while logs are still burning. This
will cause incomplete combustion, risk of
explosion, and soot on the glass.
D - ,
O NOT OVER FIRE IF HEATER OR CHIMNEY
CONNECTOR GLOWS YOU ARE OVER
It is a good idea to leave a 3/4" layer of
ashes in the combustion chamber, as this
will act as insulation.
–
BUILD
.
- .
FIRING