hestan KGC 30 Manuel D'installation page 17

CARE & MAINTENANCE
CLEANING GAS BURNER:
IMPORTANT: Before cleaning, make sure all controls are off
and the cooktop is cool.
1) Remove grates.
2) Remove the burner cap (A) from the burner base and clean
according to cleaning section.
3) Remove the burner spreader (B).
Clean the gas tube opening and burner port according to
cleaning section
4) Clean the burner base with a damp cloth. Keep the gas
orifice area free of cleaning agents and any other material
from entering the orifice(s) (C).
5) Replace the burner spreader and cap, making sure the
alignment pins are properly aligned with the slots.
6) Turn on the burner.
If the burner does not light, check cap and spreader
alignment. If the burner still does not light, do not
service the gas burner yourself. Contact a trained repair
specialist.
NOTES ON CENTER BURNER
Be careful not to get debris or cleaners in the exposed orifice (C) or in the area under the
orifice cover (D).
A
B
C
Figure 9. Stacked burner pieces
(CONTINUED)
Figure 8.
A
B
D
Figure 10. Center burner pieces
©2018 Hestan Commercial Corporation
A
B
C
Single burner pieces
C
15
EN