Care & Maintenance - hestan KGC 30 Manuel D'installation

CARE & MAINTENANCE
CLEANING
The entire Cooktop can be safely cleaned by wiping with a soapy sponge, then rinsing and drying.
If stubborn soil remains, follow the recommended cleaning methods below.
CAUTION:
Before cleaning, be certain the burners are turned off and the grates are cool.
Always use the mildest cleaner that will do the job.
Use clean, soft cloths, sponges or paper towels.
Rub stainless steel finishes in the direction of the grain. Wipe area dry to avoid water marks.
Do not clean removable cooktop parts in any self-cleaning oven.
After cleaning, place all parts in their proper positions before using cooktop.
SUGGESTED CLEANING MATERIALS
The cleaners recommended below and on the following page indicate cleaner types and do not
constitute an endorsement of a particular brand. Use all products according to package directions.
Parts and materials
Burner base Damp cloth.
(Cast aluminum)
Gas spreader • Detergent and hot water; rinse and
dry.
(Cast aluminum)
• Stiff nylon-bristle toothbrush to clean
port openings.
Abrasive cleansers: Revere ware®
metal polish. Following package
directions. Use Brillo® or S.O.S.® pads.
Rinse and dry.
Burner cap and grate • Non-abrasive cleaners: Hot water
and detergent, Fantastic, Formula
(Porcelain enamel
409. Rinse and dry immediately.
on cast iron)
• Mild abrasive cleaners: Bon Ami®
and Soft Scrub®.
• Abrasive cleaners for stubborn
stains: soap-filled steel wool pad.
Suggested cleaners Suggestions/Reminders
Keep the gas orifice area free of
cleaning agents and any other material
from entering the orifice.
Rub lightly, in a circular motion.
Aluminum cleaners may dull the surface.
To clean port opening, use a toothbrush
or straightened paper clip.
• The grates are heavy; use care when
lifting. Place on a protected surface.
• Blisters/crazing/chips are common due
to the extreme temperatures on grate
fingers and rapid temperature changes.
• Acidic and sugar-laden spills deteriorate
the enamel. Remove soil immediately.
• Abrasive cleaners, used too vigorously
or too often, can eventually mar the
enamel.
©2018 Hestan Commercial Corporation
EN
13