How To Use - Sonnenkonig VIENTO Mode D'emploi

3 How to use

The Fan may be operated by the control panel (as shown) or by your remote control.
EN
1. Place the Fan on a stable and flat surface. Plug the DC power jack of AC/DC adaptor to
the DC power socket and turn 90 dregree. Then plug the power cord into an a.c. 220-
240V electrical outlet. The LED screen will display "00".
2. POWER: Turn the Fan ON by pressing the
3. SPEED: Press the
setting is displayed on the LED light.
4. OSC(UP/DOWN): Press the
on. To stop the oscillation, press the key again.
5. OSC(LEFT /RIGHT): Press the
direction. To stop the oscillation, press the key again.
6. TIMER: Press the
from 1 to 8 hour.
*** Remarks: After settings, the LED light and display will light off automatically
after 10 to 20 seconds.
key to adjust the Fan speed to desired level (1 to 6 level). The speed
key to allow the Fan to UP/DOWN oscillate the wind directi-
key to allow the Fan to LEFT /RIGHT oscillate the wind
key to set desired auto power off time, There are 8 time intervals,
36
key, the Fan starts at speed level 3.