How To Use; Battery Replacement - Sonnenkonig NOBLADE 2.0 Mode D'emploi

3 How to use

• The fan shall be put in a leveled place. Please don't place the fan
EN
in unstable places, such as slope, soft surfaces to avoid the fan to
be damaged or malfunction due to overturned
• Keep curtains away from the sides and rear when the fan is plug-
ged in. Don't put any object into the inlet grille.

BATTERY REPLACEMENT

1. Turn the cover on the back of the remote control counterclockwise and remove it.
2. Remove the old battery.
3. Insert the new battery and cover.
4. Close the cover clockwise.
Insert the power plug into the socket and the LED display will switch on.
OPERATION DIRECTLY ON THE DEVICE
Press the front panel screen once to turn on the unit.
Press the screen again to gradually increase the ventilation level.
Press and hold the screen to turn off the unit.
Don't place any objects
within a radius of 30 cm
Please take out the battery
if it is not used for a long time
LED display
36