Commissioning And Settings - Storch HPM touch pro Mode D'emploi

HPM touch pro - display overview
1. Date and time display
2. Battery display status
3. Illustration of the selected material characteristics
4. Measurement result in, weight in % and relative humidity
in %/DIGITS
5. Status message on the measurement result (dry/green – cri-
tical/yellow – moist)
6. Menu bar
1
3
5
6

Commissioning and settings

Pulling off the protective cap
The measuring needles are exposed by pulling off the protec-
tive cap. In this process, the moisture measuring device does
not switch on automatically.
Once again reposition the protective cap after measurements
to prevent injuries caused by measuring needles and any
damage to the needles themselves.
129
2
4