3.1 Introduction
This operating manual should be used to get the most benefit
from your EXTRO-STRIPPER.
Following these instructions will both extend the life of your
machine and reduce repair costs. Please ensure any user of the
machine is fully familiar with the instructions for use before
allowing work to start.
3.2 Danger while working with the machine
The EXTRO-STRIPPER is designed to the highest technical
standards. Incorrect use can be dangerous!
Disturbances that could impair safety, have to be eliminated at
once.
3.3 Restriction of use
The EXTRO-STRIPPER is exclusively for removing bonded
floor coverings in dry environments.
It should not be used for any other purpose. Wolff cannot be
held responsible for any damage or loss caused by incorrect use.
3.4 Genuine Spare Parts
Spare parts and accessories are manufactured uniquely for the
Turbo- Stripper. It must be emphasized that parts obtained from
unauthorized sources must not be used.
Wolff cannot be held responsible for the performance of or any
damage arising from the use of machines in which genuine
spare parts have not been used.
This is particularly important with replacement blades.
EXTRO-STRIPPER 2, 230 V #038588, 115 V
#039121,RÄSM
Use this machine only
as
instructed
in
this
with the machine in perfect working order.
WOLFF cannot be held responsible for any damage or
loss caused by incorrect use Correct use also includes
to take care of all directions from the operating
manual and
the execution of maintenance and service.
operating
manual
11