Maintenance; Restriction Of Use - WOLFF MAMBO Evo D Mode D'emploi

Use this machine only
as instructed in this operating manual
with the machine in perfect working order.
WOLFF cannot be held responsible for any damage or
loss caused by incorrect use Correct use also includes
to take care of all directions from the operating
manual and
the execution of maintenance and service.
08/2010 Schleifmaschine MAMBO Evo, Artikel-Nr. 061804
3.1 Introduction
This operating manual should be used to get the most benefit
from your Grinding machine MAMBO Evo. Following these
instructions will both extend the life of your machine and reduce
repair costs.
Please ensure any user of the machine is fully familiar with the
instructions for use before allowing work to start.
3.2 Danger while working with the machine
The Grinding machine MAMBO Evo is designed to the highest
technical standards. Incorrect use can be dangerous!
Use this machine only
Disturbances that could impair safety, have to eliminated at once.

3.3 Restriction of use

The Grinding machine MAMBO Evo is exclusively for wet-clea-
ning and polishing of resilient and textile floor coverings, and for
grinding and milling pavement and levelling compounds in dry
environments. It should not be used for any other purpose. Wolff
cannot be held responsible for any damage or loss
caused by incorrect use.
3.4 Genuine Spare Parts
Spare parts and accessories are manufactured uniquely for the
Grinding machine MAMBO Evo. It must be emphasized that
parts obtained from unauthorized sources must not be used.
Wolff cannot be held responsible for the performance of or any
damage arising from the use of machines in which genuine spare
parts have not been used.
This is particularly important with milling discs.

4.0 Maintenance

The Grinding machine MAMBO Evo is virtually maintenance-free.
The roller bearings and gear box need not to be lubricated.
5.0 Use
Inserting the safety- and suction ring
Lay the machine down on rubber buffer. Thus the support of the
discs is accessible.
insert safetyring
mount at once a disc to fix the suction ring
Assembly of mounting discs, pads and brushes
Lay the machine down on the handle. Thus the support of the
discs is accessible. Put the mounting disc on the actuation and
lock it by turning anti-clockwise.
14