Megasat Countryman GPS plus Mode D'emploi page 35

8. Mounting on the roof
13
Parts required, allen wrench and eight(8) of
M6×15 bolts
15
Place cable holder 40-45 cm away from the rear centre of the antenna. Apply friction tape 5mm from
the outside of the holder
16
Drill a 25mm hole in the centre of the
tape marking
Place the antenna on the mounting plate and
tighten firmly each of the bolts with allen wrench
40-45 cm
Make sure that hole size is minimum so that the
cable can pass through.
ENGLISH
14
17
15