Megasat Countryman GPS plus Mode D'emploi page 36

8. Mounting on the roof
18
Signal cable, controller cable, cable holder and gland are required.
19
Set up required parts as above picture.
20
Place and hold the assembled cable holder inside
the tape markings. Drill three(3) 2mm holes
22
Apply silicone around cable holder and on the
top of the screws for waterproof
16
21
Fix cable holder on the vehicle roof with
three(3) of M4 x 20 screws on drill holes made
23
Connect cables to relative ports. Remove
friction tape then tidy silicone before dry
ENGLISH