Testing Functions - Dometic Waeco MagicSpeed MS880 Instructions De Montage Et De Service

Testing functions

15 Testing functions
15.1 Testing the cruise control function
NOTE
I
The lowest speed at which the cruise control works is around
40 km/h.
Start the vehicle.
Switch on the cruise control by pressing the ON/OFF button on the control
element briefly (< 1 sec).
You will hear two low-pitched signals.
The LED on the control element lights up in green.
Drive at a speed of 40 to 50 km/h.
Press the SET button to configure the preferred speed.
The cruise control gently takes on the speed and maintains the driving
speed at a constant level.
15.2 Testing the speed limiter function
NOTE
I
The lowest speed at which the speed limiter works is around
40 km/h.
Start the vehicle.
Press the ON/OFF button once for longer (> 1 sec) to switch on the
speed limiter.
One low-pitched and two high-pitched acoustic signals sound.
The LED on the control element lights up in green.
Drive at a speed of 40 to 50 km/h.
Press the SET button to configure the current top speed.
The speed limiter will now limit the speed driven at the current top speed.
For further settings for this function, see chapter "Setting the
speed limiter" on page 100.
104
MagicSpeed MS880
EN