Dometic Waeco MagicSpeed MS880 Instructions De Montage Et De Service page 103

MagicSpeed MS880
Step 2
To configure the settings, press the SET or RES button in accordance with
the figure below. "Manual Override ON" and "Speed Alert OFF" are set at the
factory (dark grey field).
Manual Override ON
Speed Alert OFF
1x
Setting
Manual Override ON
Speed Alert OFF
Manual Override OFF
Speed Alert OFF
Manual Override OFF
Speed Alert ON
Set the preferred functionality using the SET button or the RES button.
Step 3
Apply the brake to save the setting.
You will hear six acoustic signals.
The setting has been saved.
EN
SET
Manual Override OFF
Speed Alert OFF
2x
Explanation
The current top speed can be exceeded up to the
absolute maximum speed by kick down (pressing the
accelerator).
The current top speed can not be exceeded.
The current top speed can be exceeded. When
exceeded, three low-pitched acoustic signals sound.
You can also exceed the absolute maximum speed.
Setting the speed limiter
RES
Manual Override OFF
Speed Alert ON
3x
103