Scope Of Delivery; Set-Up - Daikin Altherma EHS04P30B Instructions D'installation Et D'utilisation

4 x Set-up and installation

4.1.3 Scope of delivery

– Daikin Altherma EHS(X/H)
– Bag of accessories (see fig. 4-3)
A Handles (only required for
transport)
B Cover screen
C Hose connection piece for
safety overflow
D Spanner
Fig. 4-3 Content of bag of accessories
Installation and operating instructions
18
E Ball cock
F Flat seal
G O-ring
H Tie wraps
I Plug bracket
J Venting tube

4.2 Set-up

CAUTION!
Only erect the Daikin Altherma
EHS(X/H) when a sufficient ground
load-bearing capacity, of
1050 kg/m² plus safety margin, has
been assured. The ground must be
flat and level.
Outdoor installation is not permitted.
Erection in explosion-risk environ-
ments is not permitted.
The electronic control system must
not be subjected to atmospheric
factors under any circumstances.
The storage tank must not be
exposed to continuous direct
sunlight, as the UV radiation and the
effects of the weather will damage the
plastic.
The Daikin Altherma EHS(X/H) must
be installed in a manner protected
from frost.
Make sure that the supply company
does not provide corrosive
domestic water.
– Suitable water treatment may be
required.
WARNING!
The plastic wall of the storage tank on
the Daikin Altherma EHS(X/H) may melt
due to the effects of external heat
(>80 °C) and in the extreme case, can
catch fire.
Erect the Daikin Altherma EHS(X/H)
only at a minimum distance of 1 m to
other heat sources (>80 °C)
(e.g. electric heater, gas heater,
chimney) and flammable materials.
Daikin Altherma EHS(X/H)
Daikin Altherma integrated solar unit
008.1441399_02 – 01/2021 – EN