Setting Spool Pins; Removing Or Inserting The Bobbin Case - Janome QS2250 Livret D'instructions

Janome 2250 Instruction Manual
q
www.toews.com
w
q
e
q
w
e

Setting Spool Pins

The spool pins are used for holding the spool of
thread in order to feed the thread to the machine.
To use, pull up the spool pin. Push down for storage.
q
Upper thread
w
Hole
e
Tangle
NOTE:
When using thread which has tendency to
tangle around spool pin, thread through the
hole of spool pin as shown.
The hole should face the thread spool.

Removing or Inserting the Bobbin Case

Open the hook cover.
q
Hook cover
Raise the needle by turning the handwheel toward you.
Take out the bobbin case by holding the latch.
w
Latch
When inserting the bobbin case, place the horn into the
recess of the hook race.
e
Horn
16
QS2250 Owners Manual/ User Guide