To Remove And Attach The Presser Foot - Janome QS2250 Livret D'instructions

Janome 2250 Instruction Manual
www.toews.com

To Remove and Attach the Presser Foot

To remove
Turn the handwheel toward you to raise the needle to its
highest position.
Raise the presser foot.
Press the lever on the back of the foot holder.
The presser foot will drop off.
To attach
Place the presser foot so the pin on the foot lies just
under the groove of the foot holder.
Lower the foot holder to lock the foot in place.
12
QS2250 Owners Manual/ User Guide