Weld Cable Connections; Input Power Connection - Miller WC-115A Manuel D'utilisation

2-5. Weld Cable Connections

Rear View
2
– +
Welding Power
Source

2-6. Input Power Connection

OM-1078 Page 12
1
8
3 4 5
Tools Needed:
1
2
7
Front Panel
Opening
6
1/4 in
3/4 in
ST-149 920-A / ST-151 113 / ST-801 487-A / Ref. SC-139 439-B
3
4
1 Lower Left Grommet
2 Positive (+) Weld Output
Terminal On Welding Power
Source
3 Reed Switch
4 Weld Cable (Customer
Supplied)
5 Weld Cable Terminal
6 Weld Power Cable From
Gun/Feeder
7 Weld Power Grommet
Route weld cable and weld power
cable as shown. Be sure lug on
weld cable terminal and lug on gun/
feeder weld power cable make con-
tact with each other.
8 Contactor W1 (Optional)
Connect weld cable from welding
power source to unused W1
terminal.
Connect weld cable from W1 to
weld cable terminal.
Reinstall wrapper.
1 Contact Closure
Interconnecting Cord And
Plug PLG5
2 Voltage Sensing Lead
Connect to workpiece for CC op-
eration (see Section 2-4).
3 Grounded Receptacle
A 15 ampere branch circuit pro-
tected by time-delay fuses or circuit
breakers is required.
4 Input Power Cord And Plug
PLG4
Connect input power plug to a prop-
er receptacle.
Ref. ST-149 548-B