Activation Of "Programmed Weekly Switch On" Function - GGM gastro POP434E Mode D'emploi

To set another day for switch on, operate as follows:
10. Press and release the "PROGRAMMES" key when
setting the minutes: the day will flash.
11. Repeat point 3... 9.
To leave procedure, operate as follows:
12. Hold the "PROGRAMMES" key pressed down for
1 s: the LED "DELAY" will switch off.
To prematurely leave procedure, operate as follows:
13. Do not operate for 60 s (any changes will not be
changed).

Activation of "programmed weekly switch on" function

To activate the "programmed weekly switch on" function,
operate as follows:
1. Ensure that the days and times of switch on and of
programmes to start up have been set.
2. Switch the appliance off by pressing the "SWITCH
ON/OFF" key for 1 s: the LED "DELAY" will flash,
the bottom of the "UPPER" display will show the
day and the time of switch on of the next
programmed weekly switch on and the bottom of
the "LOWER" display will show the programme
number to start up.
3. Press and release the "INCREASE" or
"DECREASE" key within 15 s to select a
programmed weekly switch on.
4. Hold the "START/STOP" key pressed down for 1 s
within 15 s: the LED "DELAY" will stay fixed on,
the appliance display will show the day and time of
switch on of the next programmed weekly switch
on and the programme number to start up and the
appliance will leave the procedure.
If a programmed weekly switch on is changed through
pressing and releasing the "PROGRAMMES" key, the
"INCREASE" key and the "DECREASE" key after the function
has been activated, such changes will not be saved.
To prematurely leave procedure, operate as follows:
5. Press and release the " SWITCH ON/OFF" key or
do not operate for 15 s (any changes will not be
saved).
71